Technical Configuration

1.  Profile:

HP300-C5 two-component high pressure injecting machine, low pressure foaming machine, has one PLOY barrel and one ISO barrel, and the two metering units are drived by two independence motors , through change the motor’s speed to control the metering pump’s output. This kind of machine is specially used in the polyurethane foaming products.

2.  Equipment, main technical parameters anddescription

2.1  Equipment Type: HP300-C5

2.2  The application of foam: hard foam

2.3  Viscosity: (22 ℃) Polyol : ~ 2000mPas Isocyanate: ~1500mPas

2.4  Injection capacity (mixing ratio 1:1) :200~5000g/s(1:1)Mixture ratio adjustment rang: 5:1 ~ف:1

2.5  Injection time: 0.01 ~ 9.99s (accurate toـ.01s)

2.6  Injecting program setting:    Manual inject time set:كpcs.        Auto inject time set:㻣pcs.

2.7  Measurement Unit: Measurement accuracy of ≤ـ.5%

Components, including those with anti-vibration pad bracket, speed adjustable motor, coupling of shaft, high precision metering pump of volumetric gear type and safety valves, pressure sensor , rotating speed sensor. Metering pump and motor connected by magnetic.

2.8  Pressure limit and control system

Both Polyol and Isocyanate working pressure are in a range of 6~22Mpa. Whenever the

working pressure exceed the range of 25Mpa, the machine will be stopped automatically and give an alarm at the same time.

2.9  Component flow control and test unit

According with the pump’s flow 、 the components’ mixing range and the related parameters,Our machine can change the components’ flow out by adjust the shift motor. Testing andcorrecting the components’ flowing parameters and the mixing range by their own feeding valve, so as to adjust and control the components’ flow.

2.10  Component filter:

It is installed between material tank and metering pump. The accuracy of filtering is A-330μm，B-330

μm

2.11  Mixing head – DHV�/2K:

With advanced technology to produce high-pressure self-cleaning linear mixing head, using needle adjustable nozzle. In order to ensure mixed

Effect of raw material respectively from two different directions of collision mixing nozzle in order to ensure adequate mixing component.

2.12  Machine frame

Used for fix the tank、metering pump system、pipe、control system.

2.13  Hydraulic Unit

l  Pump flow (L / min):㺌

l  Motor(SIEMENS) Power (kw):ه.5

l  Motor speed (rpm):�

l  Pressure sensor：0-40Mpa Germany IFM

l ف Pcs 100L oil tank installed above the supporting plate

install the driver to install on-board motors, pumps, buffer coupling, hydraulic manifold block, integrated block is installed on the booster valve

l  All valves, pressure gauge, pressure switches and manual vent valve load, etc.

l ف Pcs 10L high-pressure accumulator, in order to ensure rapid mixing and to absorb the vibration of the first switch

l ف full precision back to the oil filter

l ف set of oil cooler, valves, etc. to ensure the hydraulic system will not work in a continuous temperature rise is too high (≤ 60 ℃)

l ف set of level display, indicating the oil level inside the tank

l ق Pcs NG10 solenoid valve control L were mixed the first two mixing chamber and the main piston to open or close.

l 㺊L Nitrogen hydraulic accumulators

2.14  Polyol tank:فPcs.

l  Effective volume: 300 liters

l  Jacket heating reservation style, High stainless steel

l  Maximum working pressure:ـ.6MPa

l ف Pcs jacket water safety valve, set the working pressure ofـ.25MPa

l ف Pcs safety valve, set pressure 0.05~0.45MPa, to control the max. air pressure

l  Output is from T pipe with two manual cut valve (bypass valve is used for sewage)

l  Temperature transducer: PT50

l  Visible Liquid level display.

l فPcs agitator,0.55kw, speed 46rpm, with mechanical sealing.

l فPcs safety cabinet with Air circulation fan

l  2Pcs flammable gas MSA sensor from America

One is inside of safety cabinet and the other is outside.

2.15  Isocyanate tank:فPcs.

l  Effective volume: 300 liters

l  Jacket heating reservation style, High standard structral steel

l  Maximum working pressure:ـ.3MPa

l ف Pcs jacket water safety valve, set the working pressure ofـ.25MPa

l ف Pcs safety valve, set pressure 0.05~0.45MPa, to control the max. air pressure

l  Output is from T pipe with two manual cut valve (bypass valve is used for sewage)

l  Temperature transducer: PT150

l فPcs agitator,0.55kw, speed 46rpm, with mechanical sealing.

l  Visible Liquid level display.

2.16  Temperature control unit：

l  Refrigeration cooling unit “(Kcal/h)”�

l 㺊HP compressor, water pressure 0.25MPa, automatic control of foaming raw material temperature processrequirements.

l  Heating function.

2.17. High and low pressure shift unit

High pressure cycle switching unit using inverter synchronous valve, high and low pressure switching unit by action cycle inverter synchronous valve, quick and reliable action, Polyol and ISO material synchronous switch can effectively prevent channeling.No sealing design, so no need to replace).

2.18  Metering monitoring and ratio automatic unit:

The flow meter can display the ratio per second, and the proportion of each product can be displayed, and also can change the proportion and flow through the touch screen. It can also be corrected by mixed head measurement.

2.19  Material feeding system: Independent gear pump for B material,flow is 40L/MINPneumatic pump for A material.

2.20  Electrical Control System

Electric control system adopts Omron PLC, input, output modules, touch screen Winlun.

Include control cabinet Omron touch screen Omron relay Schneider contactor French Schneider switches, buttons External interface system software and control procedures.

Touch screen display as following: Injecting work number: 50Pcs.

Injecting time 0.01-99.99；

component of the pressure is too small or too large, over-pressure metering pumps and other fault information Control system failure alarm has a strong, sound and light alarm devices equipped with necessary equipment automatically shut down.

Pentane checking system is independent. After checking the pentane is at safety condition and air exhaustion is normal, the main machine can be power on and work. The exhausting fan is controlled by inverter, if pentanes is increasing at air, the fan will running faster, to make sure the machine and operator safety.

2.21  Pipe and air system

Material pipeline, include soft pipe to convey the raw material. Feed pipe is assembled ontothe Mixing head, and return pipe is connected with raw material tank

Air and liquid pipe is used to pipe the compressed air and cleaning liquid. This is anti-solvent and high pressure pipe

Air is filtered by oil and water separator, oil frog device.

2.22 ：Electricity: 3×380V/50HZ

Power:               around㻒KW

Machine size: 4600X2200mmX2180mm（LXWXH）

3．Machine configuration list: